7
English
• Pre-treat all stains and heavily soiled areas for best results.
• Do not overload your washer.
• Close the door properly after loading the clothes.
• When loading wet items, keep water level high enough to keep the unit in
balance and to allow clothing to float easily in the water.
Proper Use of Detergent
• Fill water in the tub at the "Low" water level.
• Add the detergent.
• Load the washer.
• Select the water level.
Note:
The amount of detergent used depends on the size of the load, the water
type (hard or soft) and whether the clothes are heavily soiled or lightly
soiled. Besides the performance of the washing machine, the quality of the
detergent also affects the wash result. For best results, use low sudsing
detergents only. Refer to the detergent manufacturer’s recommended
amount for usage.
Proper Use of Bleach
Refer to the bleach manufacturer’s chart for the recommended use of liquid
bleach. Dilute the bleach and add it to the water before putting clothes into the
washtub.
Warning!
Be careful not to spill undiluted bleach onto the washer cabinet or onto
clothing. It is a strong chemical that may damage your clothes and the
finish of the washer if not properly diluted.
Lint Filter and Water Filter
• The Lint filter is located inside the washer drum. A small nylon bag collects lint
and residue from clothes during the wash cycle.
Note:
Do not wash your clothes without the filter in its compartment
inside the tub.
• You must clean the filter after every load for the best results. Push down the tab
in the filter to remove. Clean and slide the filter back in place.
• There is also a filter in the water inlet valve. This prevents foreign particles in
the water from entering the washer. Clean this at least once a month.