Haier HL15T, Руководство по обслуживанию

Страница: 15 / 54

for assistance.
Choose Your Connection
There are several ways to connect your television, depending on the components you want to connect
and the quality of the signal you want to achieve. The following are examples of some different ways
to connect your TV with different input sources. Choose the connection which is best for you.
VCR connection
To avoid picture noise (interference), leave an adequate distance
between the VCR and TV
L R R L V
S- Video CV BS S- Video/ CVB S
Audi o In
AV OUT
RF INP UT
Connection Option 1
Set VCR output switch to channel 3 or 4 and
then tune the TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the TV input jacks, as
shown in the figure.
When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white,and Audio Right = red).If
you connect an S-VIDEO output from VCR tothe S-VIDEO input, the
picture quality is improved; compared to connecting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner`s manual.)
3. Select the input source with using the INPUT button on the remote control, and then press ▲ / ▼ button to select the
source,press the
►
button to confirm.
External Equipment Connections
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equipment's
output jacks to the TV input jacks, as shown in the figure.
When connecting the TV to external equipment, match the
L R R L V
S- Video CVBS S- Video/ CVBS
RF INPUT
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the INPUT button on
the remote control.
2. Press the ?/ ?button to select the desired source.
3. Press the ok button to confirm
2. Operate the corresponding external equipment.
Audio In
AV OUT
Camcorder
Video Game Set
22
All manuals and user guides at all-guides.com