Haier HIC-654CF-S, Инструкция по установке/Руководство пользователя

Страница: 13 / 18

11
PAINTED PARTS AND SILKSCREEN PRINTED SURFACES
Clean using an appropriate product. Always dry thoroughly.
IMPORTANT:
these parts must be cleaned very carefully to avoid scratching and abrasion.
You are advised to use a soft cloth and neutral soap.
CAUTION: Do not use abrasive substances or non-neutral detergents
as these will irreparably damage the surface.
GAS TAPS
•
In the event of operating faults in the gas taps, call the Service Department.
BURNERS
•
•
•
•
These parts can be removed and cleaned with appropriate products.
After cleaning, the burners and their flame spreaders must be well dried and correctly replaced.
It’s very important to do so can check that the burner flame spreader and the burner have been
correctly positioned. Failure to do so can cause serious problems.
Check that the electrode/s next to each burner is/are always clean to ensure trouble-free sparking.
Both the probe and ignition plug must be very carefully cleaned.
Note: To avoid damage to the pulse ignition do not use it when the
burners are not in place.