Haier HIC-654CF-S, Инструкция по установке/Руководство пользователя

Страница: 12 / 18

10
GENERAL ADVICE
•
•
•
Before you begin cleaning, you must ensure that the appliance is
switched off and disconnected from the electrical power supply.
Important: The use of suitable protective clothing/gloves is
recommended when handling or cleaning of this appliance.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitable qualified personnel.
CLEANING AND MAINTENANCE
3
•
•
•
•
It is advisable to clean when the appliance is cold and especially when cleaning the enamelled
parts.
Be very careful that no water penetrates inside the appliance.
Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces.
Avoid using cleaning products with a chlorine or acidic base.
• Do not use a steam cleaner because the moisture can get into the
appliance thus make it unsafe.
• Important: The manufacturer declines all liability for possible damage
caused by the use of unsuitable products to clean the appliance.
WARNING! When correctly installed, your product meets all safety requir
ements laid down for this type of product category. However special care
should be taken around the underneath of the appliance as this area is not
designed or intended to be touched and may contain sharp or rough edges,
that may cause injury
-
.
ENAMELLED SURFACES
STAINLESS STEEL SURFACES
Stainless steel parts must be rinsed with water and dried with a soft and clean doh.For persistent
dirt, use specific non-abrasive products available commercilly or a lttle hot vinegar.
All the enamelled parts must be cleaned wilth a sponge and soapy water only or other non-abrasive
products. Dry preferably with a microfibre or soft cloth.If acid substances such as lemonjuice,
tomato conserve, vinegar etc.are left an the enamel for a long time they will etch it, making it opaque.