24
PIN2.
8.3.3 Changing password
Here you can change the password of your device.
The default password is 0000
8.4 Network
8.4.1 Choosing mode
Here you can select Auto or Manual mode.
Auto: After powering on your device, it will register your phone to the first service network according to a
network list. If it fails, system will attempt to try next network.
8.4.2
Preferred
Your preferred network is a network list on which you can do operations on the network listed. Select
Preferred from network settings, then select Add and you can add networks from both the available and
known.
8.4.3 Known
Select a network at random from all detected networks.
8.5 Reset
Reset setting
Perform it to restore all the system settings to factory ones. You are required to input phone password. Enter
the password, and then press LSK (
OK
).
It will pop up”Resumed to default factory setting?” press LSK to continue.
After the reset finishes, it auto-power off the device.
Note: If your password is incorrect, it will pop up”Phone password invalid!”
Clear all
Perform it to not only restore the system settings, but also clear all your data on your device.
That is, all data stored on your device will be lost after the restoration.
Select
Clear all
, and then input the password required. It will ask you” Clear all of your data?”
Press LSK to continue.
Note Run this program with care. Please back up your data before doing this.
