Haier HFF750CGBJ, Руководство пользователя

Страница: 18 / 82

Use
EN
16
The indoor temperatures are in fl uenced by the following factor:
▶
Ambient temperature
▶
Frequency of door opening
▶
Amount of stored foods
▶
Installation of the appliance
Select the working mode
You may need to select one of the following two ways to set the appliance:
1) Auto Set mode
Under Auto Set mode, the appliance can automatically adjust the temperature setting ac-
cording to the ambient temperature and temperature change in the appliance. If you do
not have any special requirements, we recommend that you use Auto Set mode (refer to
Auto Set mode later on).
2) Manual adjusting mode:
If you want to manually adjust the temperature of the appliance in order to store a par-
ticular food, you can set the temperature via a temperature adjusting button (refer to
ADJUST THE TEMPERATURE).
Door opening alarm
When the refrigerator door is opened for more than 1 minute, the door opening alarm
will sound. The alarm can be silenced by either closing the door or touching the control
panel. If the door is left open for more than 5 minutes, the light inside the compartment
and control panel illumination will automatically switch o
ff .
Adjust the temperature
Adjust the temperature for fridge
1. Unlock the panel by pressing button “G” if it is
locked.
2. Press button “ A“ (Fridge) for select the fridge com-
partment. An alarm sounds. The setting tempera-
ture in the refrigerator compartment is displayed.
3. Press button “A” to set the fridge tempera-
ture. A signal will sound at each key press.
The temperature increases in sequences of 1°C
from a minimum of 1°C to a maximum of 9°C,
switching to 1°C again when pressing further. The
optimum temperature in the refrigerator is 5 °C.
Colder temperatures mean unnecessary energy
consumption.
If no key is operated in 5 sec., the setting con fi rms au-
tomatically.
1. 2.
r