14
•
Clean the door gaskets. See “Cleaning.”
•
Prop open the doors to allow air to circulate inside.
REINSTALLING/USING FREEZER AGAIN
If the freezer has been placed in a horizontal or tilted position for any period of time
wait 24 hours before plugging in the freezer to allow the refrigerant to settle.
1. Clean Freezer. See “Cleaning.“
2. Move freezer to desired location. Check that it is level and shim, if necessary.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
3. Plug into grounded 3 prong outlet.
TROUBLESHOOTING
First try the solutions suggested here to possibly avoid the cost of a service call.
PROBLEM
POSSIBLE CAUSE(S)
SOLUTION
Freezer does not
run
The freezer is unplugged. Plug freezer into a grounded
3 prong outlet.
The circuit breaker is
tripped or turned off /
Fuse is blown.
Reset / Turn on circuit breaker or
replace fuse
The temperature control
is turned to OFF.
Turn the temperature control to
a setting between 1 and 7.
The compressor cycle is
not complete.
Wait 30 to 40 minutes to see
whether the freezer will start.