I. The dryer does not start
Possible causes:
1. The power supply plug peels off;
2.The local circuit is out of power;
3.The door is closed tightly;
4. Programme knob on
Ā
OFF
ā
;
5.The Start/Pause button has not been pressed;
6.The condensate collection box is full;
Troubleshooting:
1.Insert the power plug into an appropriate receptacle to turn on the power
˗
2.The door is closed
˗
3.Turn programme knob to choose the dyring programme
˗
4.Touch "Start/Pause "button
˗
5.Empty the bank
DŽ
Ċ
The drying result is not good and the drying time
too long.
Possible causes:
1.The drying program setting is not correct;
2.The filter screen has not been cleaned up;
3.The condenser is blocked;
4.The amount of the loaded laundry exceeds the
rated load;
5. The loaded laundry has been not spun dry;
6. The vent duct is blocked;
7. The surface of the inside of the drumgets a segregation layer;
Troubleshooting:
1.Set the drying program correctly;
2. Clean the filter screen;
3.The condenser is blocked;
4.Decreas the amount of the loaded laundry;
5. Spin the loaded laundry dry;
6. Clean the vent duct;
7. Clean up the surface of the inside of the drumgets;
ċ
The light in the drum is off
Possible causes:
1. The power supply dosen't turns on;
2. The bulb is damaged;
Troubleshooting:
1.Turn on the power supply.
2.change the bulb.
Condenser Tumber Dryer
HDY6-1
Trouble shooting
-16-
