Condenser Tumber Dryer
HDY6-1
- Using a coin or other tool, push the slides on the cover to the position
as shown in the figure and then remove the cover;
- Turn the condenser's handle 90 degrees in the direction as shown in
the figure;
- Remove the condenser from the dryer;
- Clean the condenser by a brush or flush it by a water jet;
Note: Do not use a sharp tool in cleaning the heat exchanger, otherwise
it may damage its sealing performance;
- Put the condenser back in place and lock up the cover;
- Put the lower deco panel back in place.
5. Cleaning the drum
After the dryer has operated for
a time, fabric caring agents or
calcium contained in the water will
form an almost invisible segregation
layer on the inside of the drum.
This makes the dryer not able to
reliably and accurately identify the
dryness of the laundry. So the inside
of the drum, especially the stainless
steel pieces on the blades must be
cleaned regularly by a wet cloth.
B
C
D
-15-
