10
Different Settings for Rinse Aid
Rinse aid is added during the last rinsing phase to dry the dishes without
streaks and stains.
Detergent (e.g. powder, tablets, ...)
▶
requires separate rinse aid:
Factory default setting:
. No settings are necessary.
The rinse aid is added from the rinse aid dispenser only.
Detergent with multifunction (e.g. Multitabs)
▶
combine detergent and rinse aid:
The rinse aid setting should be adjust to
. Please use the setting
instructions in section HOW TO ADJUST SETTINGS and select the
setting.
The rinse aid is added from the rinse aid dispenser in addition to the
multitabs rinse aid.
Setting
cuts off the rinse aid dosage and the rinse aid indication.
The higher the value for
the higher the dosage.
Usually the recommended setting performs well. In case of streaks,
stains, shimmer etc.; refer to section TROUBLESHOOTING.
CAUTION!
Only use rinse aid for dishwashers.
Other products can cause damage to the appliance!
1.
Press the button
（
B
）
to snap the
dispenser cover open.
2.
Pour rinse aid into the circular
（
A
）
opening, making sure not to fill beyond
the MAX marking.
3.
Close the cover, making sure it
clicks shut.
