11
CHILD LOCK
You can lock all controls to avoid unintentionally changing the dishwasher cycle
or starting the dishwasher. The light next to Child Lock will illuminate to indicate
that Child Lock is activated and the Control panel is locked.
•
Press and hold the Delay Start button for 3 seconds to Lock/Unlock the
control panel.
c
DELAY START
To delay the start of a selected cycle, press the Delay Start button until the
desired delay time shows in the LED display window. You can delay the start of
your dishwasher from 1 to 24 hours. To cancel the Delay Start option, and start
the wash cycle during the delay period, press the Start/Cancel button. The
selected cycle will begin immediately.
d
LED DISPLAY WINDOW
Displays the Time Remaining in the wash cycle, Delay Hours, and Error Codes.
Time Remaining
Time remaining in a cycle will show hours and minutes alternately (1H-2H or
0-59).
NOTE: The time remaining could increase or decrease by several minutes. This
means the Smart Sensor has checked the soil level and determined whether
additional water fills are needed or if the programmed number of water fills can
be reduced.
Delay Hours (1 to 24)
If the Delay Start option is selected, the selected time shows in the display
window. If the cycle is running, the time remaining shows in the display.
CL
“CL” will appear when the Start/Cancel button is pressed. “CL” Flashes if the
door is opened during a wash cycle. Close the dishwasher door to begin or
continue a wash cycle.
Error Indicator
In situations, which are critical to dishwasher
function and safe operation, the
control will shut down and indicate an Error code (Er) in the LED display window.
See “Error Codes” in the Troubleshooting section. If an Er code is displayed,
contact Service for assistance with troubleshooting the problem, or for help
locating an authorized service technician.
e
START/CANCEL
Start - Firmly close the door. Select the desired wash cycle and options. The
indicator light next to the cycle and options selected will be lit when activated.
Press the Start/Cancel button once.
Pause - To pause or stop the dishwasher during a cycle, open the door slowly
allowing the hot steam to escape. The dishwasher will stop. Check the detergent
dispenser. If the main wash section of the detergent dispenser is still closed, you
can add items.
Cancel - To cancel a cycle when the dishwasher is running, press the Start/
Cancel button once. The dishwasher will start a 60 second drain, and then shut
off. At the end of the drain, you can select the desired wash cycle and restart.
