English
16
Canceling a cycle
A cycle can be cancelled at any time by slowly turning the cycle
selector knob clockwise till the dishwasher starts to drain. After
draining open the door and turn the selector knob to the off position.
Changing a cycle
A cycle can be changed at any time by lifting door latch to stop the
cycle. If desired, at this time change the heated dry option. Turn the
selector knob to the required cycle. Turning the cycle selector knob
can cause the detergent dispenser to release the detergent. Check the
detergent dispensers. They must be filled for the new cycle. Close the
door till it firmly latches. The dishwasher now starts a new cycle.
Drying
During the drying cycle you will see steam escaping through the vent
located on the upper left side of the dishwasher door. This is normal
as heat dries the wash load.
CAUTION: The vapor is hot. DO NOT touch the vapor or the vent
during the drying process.
Overfill protection float
This protection float is situated in the front right corner of the
dishwasher tub. It keeps the tub from over filling. Check under the
float to remove objects that may prevent it from moving up or down.
