Haier HCP-80, Руководство по эксплуатации, Страница: 27 / 36

25
Sterilization completion interface
3.Sterilization fi nished
When the temperature in the incubator is decreased to the set temperature, it will display that
sterilization is fi nished. The user needs to manually press “Finish” to end the sterilization operation,
and then it will back to the main interface.
After fi nishing sterilization, operate by following the steps below:
• Open the outer door and inner door of the incubator;
• Refi ll with water;
• Install the HEPA fi lter (if any);
• Close all doors.
Sterilization stop interface