Installation
5
5
4.将铝制夹子夹在毛细管输出管末端，距离约150mm；用自攻螺钉（st3.5）将输出管固定在保存箱内部左上部（已
预留螺钉孔）；输出管靠近箱体内壁，喷射方向向下；
1.Install the liquid supply line onto the inlet port following the instruction label；
Install the output capillary tube and the harness for the door switch switch on the backup control box.
2.Place the backup system control box on top of the freezer. Remove the cap for the port hole on the
back of the freezer unit.
3.将保存箱内部上面两层的隔板取出；然后将输出毛细管和温度传感器穿过测试孔，进入到保存箱内部；
