background image

5

WARNING !

CAUTION !

Please ask the dealer or specialist to install, never try by the users themselves. After the installation please

be sure of the following conditions.

Incorrect installation may cause water leaking, shock and fire hazard.

Please call dealer to install the air-conditioner.

Air-conditioner can't be installed in the envi-
ronment with inflammable gases because the
inflammable gases near to air-conditioner may
cause fire hazard.

Installed electrical-leaking circuit breaker.

Connect earthing wire.

Use discharge pipe correctly to ensure efficient
discharge.

[Location]

[Wiring]

[Operating noise]

It easily cause electrical shock without circuit
breaker.

Air-conditioner should be located in well-vented
and easily-accessible place.
Air-conditioner should not be located in the
following places:
(a) Places with machine oils or other oil vapours.
(b) Seaside with high salt content in the air.
(c) Near to hot spring with high content of sulfide
     gases.
(d) Area with frequent fluctuation of voltage e.g.
     factory, etc.
(e) In vehicles or ships.
(f) Kitchen with heavy oil vapour or humidity.
(g) Near to the machine emitting electric-magnetic
     waves.
(h) Places with acid, alkali vapuor.
TV, radio, acoustic appliances etc are at least 1 m
far away to the indoor unit, outdoor unit, power
supply wire, connecting wire, pipes, otherwise
images may be disturbed or noises be created.

Earthing wire should not be con-
nected to the gas pipe, water pipe,
lightning rod or phone line, in-
correct earthing may cause shock.

Incorrect pipe use may cause water leaking.

As required, take measures against heavy snow.

Air-conditioner should be equipped with special
power supply wire.

Chose the following locations:
(a) Capable of supporting air-conditioner weight,
      don't increase operating noise and vibration.
(b) Hot vapour from outdoor unit outlet and ope-
      rating noise don't disturb neighbour.
No obstacles around the outdoor unit outlet.

Earthing

Installation

Cautions

Содержание HBU-28CF03



























Отзывы: