background image

HBS01 REMOTE CONTROLLER OPERATION MANUAL

External View of Remote Controller

Loading of the battery

1. Remove the battery cover;

2. Insert AAA batteries (included) loading is in 

line with the “+”/ “-”;.

3. Replace cover

<1>

<2>

<3>

Functional description

1. Power-up and Show All: 

After inserting the batteries the display 

will show all symbols for 3 seconds. The remote will then enter clock 

set mode. Use “+/-“ to adjust the clock. Press “Confirm” when done. 

If no action is taken within 10 seconds then the remote will exit set 

mode. See section 22 for clock setting instruction.

2. ON/OFF Button:

 Press the ON/OFF button on the remote control 

to start the unit.

3. SMART Button:

(1) In SMART mode the air conditioner will automatically switch 

between Cool, Heat, or Fan to maintain set temperature.

(2) When the fan is set to AUTO the air conditioner automatically 

adjusts the fan speed according to room temperature.

(3) The SMART button also works to power the unit on and off. 

4. COOL Button, HEAT Button and DRY Button

(1) In COOL mode ,the unit operates in cooling. When FAN is set 

to AUTO,the air conditioner  automatically adjusts the fan speed 

according to room temperature. COOL will be displayed during COOL 

mode.

(2) In HEAT mode ,warm air will blow out after a short period of 

the time due to cold-air prevention function. When FAN is set to 

AUTO,the air conditioner  automatically adjusts the fan speed 

according to room temperature. HEAT will be displayed during HEAT 

mode.

(3) DRY mode is used to reduce humidity.In DRY mode, when room 

temperature becomes lower than temp. 2

°F

,unit will run 

intermittently at LOW speed regardless of FAN setting. DRY will be 

displayed during DRY mode.

Mode 

SMART HEAT COOL

DRY

FAN

Initial TEMP.

24°C

(75°F)

24°C

(75°F)

24°C

(75°F)

24°C

(75°F)

Setting temperature 

is not showed.

Mode 

SMART HEAT COOL

DRY

FAN

Initial Fan Speed AUTO

LOW

HI

AUTO

LOW

5. FAN SPEED Button:

Fan speed selection

Press FAN SPEED button. For each press,fan speed changes as 

follows:

     

 

The air conditioner fan will run according to the displayed fan speed.

When FAN is set to AUTO,the air conditioner automatically adjusts 

the fan speed according to room temperature.

6. TEMP. +/- Buttons:

Temp+ Every time the button is pressed,the temperature setting 

increases.

Temp- Every time the button is pressed,temperature setting decreas-

es.

The operating temperature range is 60°F -86°F (16°C-30°C).

7. Quadrant Control 

(Available for some models):

This setting allows the vertical airflow to be adjusted individually on 

each side of the unit. 

(1) Initial default positions.

SMART

HEAT

COOL

DRY

FAN

Selected 

Quadrant

Show all

Show all

Show all

Show all

Show all

Vertical 

SWING Angle Position 3 Position 5 Position 3 Position 3 Position 3

(2) Press the Quadrant Control button to select the quadrant. Each 

button press will select as shown bellow: 

(3) Once desired quadrant is selected then use the Vertical Swing 

button to set the direction of airflow. See section 9.

LOW, MED and HIGH 

indicator cycles.

LOW

MED

HI

AUTO FAN SPEED

Отзывы: