Haier HB2400VD1M20 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 18

Haier HB2400VD1M20 Скачать руководство пользователя страница 7

6. INSTALLATION INSTRUCTIONS

! WARNING

adjustment and operation of this unit. Read these instructions thoroughly before attempting installation or

These instructions are intended as an aid to qualified, service and instalolation personnel for proper installation

service this equipment.

Failure to follow these instructions may result in improper installation,

service or maintenance and could possibly result in fire, electrical shock, property damage,

personal injury or death.

This product is designed and manufactured to permit installation in accordance with National Codes.

It is

prevailing local codes and regulations

. The manufacturer assumes no responsibility for equipment

installed in violation of any codes or regulations.

The United States Environmental Protection Agency (EPA) has issued various regulations

may harm the environment and can lead to the imposition of substantial fines. Because these regulations

You should be aware that the use of unauthorized components, accessories or devices may

adversely affect the operation of the air conditioner and may also endanger life and property.

The manufacturer disclaims any responsibility

regarding the introduction and disposal of refrigerants from this unit

. Failure to follow these regulations

the installer's responsibility to install the product in accordance with National Codes and/or

are subject to revision any repair on this unit should be done by a certified technician.

The manufacturer's warranty does not cover any damage failure caused by the air conditioning system.

components, accessories or devices.

for loss or injury due to the use of such unauthorized

Attach the service panel to the outdoor unit after to prevent.

If the service panel is not attached securely, it could result in a fire or an electric shock due to dust,
water, etc.

INDOOR COIL MAINTENANCE

Inspect the indoor coil at least once a year for cleanliness and clean as necessary.
1. The coil can be cleaned when dry. If it is coated with lint or dirt, blow compressed air or

nitrogen (NEVER USE REFRIGERNAT) through the supply air side of the coil fins. Place a sheet of
metal or cardboard under the return air side of the coil to catch any debris before it gets into the air
handler.

2. If the coil is coated with oil or grease, clean with a mild detergent and water solution. Rinse

3.

and flush with clear water.

4.

WARNING: DO NOT USE CAUSTIC HOUSEHOLD DRAIN CLEANERS IN THE CONDENSATE PAN

thoroughly with clear water. Be careful not to get water into the air handler.

High pressure watercan be used to clear any clog in the condensate line.

After cleaning the coil, inspect the drain pan and condensate line. Remove any debris from the pan

OR NEAR THE INDOOR COIL. THESE DRAIN CLEANERS CAN QUICKLY DAMAGE THE INDOOR COIL.

7

Central Air Conditioning Model: Air Handler, HB-D series

«
...
5
6
7
8
9
...
»

Содержание HB2400VD1M20



















Отзывы:

Нет отзывов