Placed environment
Leveller correction
After keeping on the floor, stable and hard block is needed to make it up.
Bubble package is prohibited. If not stable, foot can be adjusted,
clockwise makes it lower, and anticlockwise makes it higher.
Picture shows anticlockwise direction.
It should be kept far from heat source and direct
Sunlight, to ensure its performance.
Avoid humid or water-accessible
spilled water and dirt should be wiped with soft
cloth to avoid rust and ensure electric insulation.
place,
It should be kept in place with fine ventilation,
and at least 10cm should be left in all sides.
It can't be kept in very cold place (<5 C), or
outdoor and in rain.
0
