Haier DWL3025, Руководство по установке

Страница: 17 / 84

English
16
3FNPWFUFSNJOBMCPYDPWFSi)w1VMM
appliance wires “I” through hole in terminal
CPY%POPUVOUJFUIFLOPUJOUIFXJSFT
*GZPVBSFEJSFDUXJSJOHJOTUBMMB6-MJTUFE
CSA-certified clamp connector “J” to
UIFUFSNJOBMCPY*GVTJOHDPOEVJUVTFB
6-MJTUFE$4"DFSUJGJFEDPOEVJUDPOOFDUPS*G
you are installing a power supply cord kit,
do so now and follow kit instructions.
5. Measure height of cabinet opening from
underside of countertop to floor where
EJTIXBTIFSXJMMCFJOTUBMMFEi,w ZPV
need the lowest point). Check chart for
that height opening. Put wheels “L” in the
required position. Turn both front leveler
legs to the same height.
If the minimum cutout height is less than
w DNUIFBEKVTUBCMFMFHTDBOCF
removed for additional clearance. This will
BMMPXUIFEJTIXBTIFSUPGJUJOUPBw
DNIJHIDVUPVUCVUUIFEJTIXBTIFS
will be more difficult to move into position.
If the wheels are removed, protect the floor
when moving the dishwasher.
HELPFUL TIP:
Put cardboard under dishwasher until it is installed. The cardboard
will help protect floor during installation.
H
I
J
K
Min Cutout
Height
Wheel Position
(See Illustration)
Number of Turns
on Front Leg
34” (86.4 cm) 1 10
34 1/4” (87 cm) 2 5
34 1/2” (87.6 cm) 3 0