English
13
DRAIN HOSE
10.
$VUBw DNEJBNFUFSIPMFJODBCJOFUXBMM
or floor on the side of the opening closest to the sink.
11.
Connect drain hose to waste tee or waste disposer
following one of the following methods:
*An air gap is recommended
an air gap
11a.
no air gap*
11c.
an air gap
11b.
no air gap*
11d.
a waste disposer
no waste disposer
11a. WASTE DISPOSER & AIR GAP
1. Remove the disposer knockout plug. Cut end of drain
IPTFi*wJGOFFEFE EPOPUDVUSJCCFETFDUJPO
2. Attach drain hose to air gap “J” with large spring-type
DMBNQi,w*GUIFESBJOIPTFXBTDVUVTFBwUP
w UPDNTDSFXUZQFDMBNQ
3. Use a rubber hose *connector “L” with spring or screw-type clamps* “M” to
connect air gap to disposer inlet “N”. The connection “N” MUST be made
CFGPSFESBJOUSBQi0wBOEBUMFBTUw DNBCPWFUIFGMPPSXIFSF
dishwasher will be installed. Go to step 12.
11b. NO WASTE DISPOSER & AIR GAP
$VUFOEPGESBJOIPTFi*wJGOFFEFE EPOPUDVUSJCCFE
section).
2. Attach drain hose to air gap “J” with large spring-
UZQFDMBNQ*GUIFESBJOIPTFXBTDVUVTFBwUP
w UPDNTDSFXUZQFDMBNQ
3. Use a rubber hose *connector “L” with spring or screw-type *clamps “M” to
connect air gap to waste tee “P”. This connection “P” MUST be made before
ESBJOUSBQi0wBOEBUMFBTUw DNBCPWFUIFGMPPSXIFSFEJTIXBTIFS
will be installed. Go to step 12.
* Parts available from local pumbing supply stores.
8.
Turn shutoff valve “H” to “ON” position. Flush water into a
bucket to get rid of particles that may clog the inlet valve.
9.
Turn shut-off valve to “OFF” position
P
Содержание DWL3025
Страница 27: ...English 26 DWL3025 DWL3525 4035 7075 ...
Страница 28: ...English 27 ...
Страница 56: ...26 Español DWL3025 DWL3525 4035 7075 ...
Страница 57: ...27 Español ...