16
End of programme
Six beeps will indicate that the wash cycle has finished and the indicator light "A" comes on.
S
witching the dishwasher OFF
S
everal minutes after the programme has ended:
Set On-Off button to Off.
Open the door.
Remove dishes, etc. when they have cooled down.
I
nterrupping the programme
O
pen the door. Caution! There is a risk of water coming out from inside the appliance. Do not open the
door fully until spray arm has stopped rotating.
When you open the door, the dishwasher will beep ten times every thirty seconds.
If the appliance has already heated up or the hot water was switched ON and then the appliance door
was opened, leave the door ajar for several minutes before closing. Otherwise, the appliance door
may not close properly due to expansion.
D
elayed start programming
Y
ou can delay the start of a programme in increments of 1 hour up to 24 hours.
B
A
D F
C
G
E
I
H
Switch dishwasher ON.
Immediately press the Delayed Start button "F". The delayed start indicator "E" blinks and the time
remaining indicator "G" changes to " ".
Press the Delayed Start button for 2 seconds until the numerical display shows the required delay.
To cancel the time delay setting, press the Delayed Start button until the delayed start indicator “E"
goes out.
Rotate programme dial "J" to select the desired programme.
J
en
Close the door after loading the appliance.
Notice:
I
f the programme is already underway press the button "B" for 3 seconds. All of the
settings will be cancelled.
