manualshive.com logo in svg

Haier DW12-TFE1 series, Руководство по обслуживанию, Страница: 7 / 50

Поделиться
Скачать
Haier DW12-TFE1 series Скачать руководство пользователя страница 7

 

6 

 

Service Manual

 

Model No.DW12-TFE1 DW12-TFE2

 

Issue

 

Rev.

 

 

4. Installation 

4-1. If your family includes children 

The appliance is not intended for use by young children or infirm persons without supervision. 

Young children should be supervised to ensure that they do not play with the appliance. 

Keep detergents out of the reach of children, who must also be kept away from the dishwasher 

when it is open. 

4-2. If a fault occurs 

If the appliance malfunctions, turn off water supply to the appliance and disconnect the plug from 

the wall socket. Then, consult the section entitled, "Fault finding" .If you cannot solve the problem, 

contact a service center. 

Only specialized personnel are authorized to make repairs. 

If the supply cord is damaged, it must be replaced by a special cord or assembly available from 

the manufacturer or its service agent. 

To maintain the EFFICIENCY and SAFETY of this appliance, we recommend: 

  call only the Service Centers authorized by the manufacturer. 

  always use original Spare Parts. 

4-3. When disposing of old appliances 

Appliances which are no longer being used must be made inoperable by cutting the power supply 

cord and removing the door lock. 

Take the appliance to a designated waste disposal center. 

 

 

               

Dangerous voltage

 

             

 

 

Warning

 

Children could get locked in the appliance (risk of suffocation) or get stuck in other 

positions.  

Therefore: Remove the mains plug, cut the mains wire and set aside. Damage the door 

lock so that the door can no longer be closed.

 

 
4-4. Positioning the appliance 

Positioning the appliance in the desired location. The back should rest against the wall behind it, 

and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply 

and drain hoses that can be positioned to the right or the left to facilitate proper installation. 

 

 

 

                         

 

                          

 

                         

 

                          

Содержание DW12-TFE1 series



















































Отзывы:

Нет отзывов