background image

.5.

Loading the Dishwasher

Before placing the dishes in the dishwasher, remove larger food

particles to prevent the filter from becoming clogged, which re-

sults in reduced performance.

If the pots and pans have baked-on food that is extremely hard

to remove, we recommend that they are soaked before washed.

This will eliminate the need for extra wash cycles.

Pull out the rack to load the dishwasher.

How to use the lower rack

We recommend that you place the most difficult to clean items

on the lower rack: pots, lids, serving dishes and bowls, as shown

in the figure on the right.

It is preferable to place serving dishes and lids on the sides of the racks

in order to avoid blocking the rotation of the top spray arm.

- Pots, serving bowls, etc. must always be placed face down.

- Deep pots should be slanted to allow the water to flow out.

- The lower rack features fold down tine rows (see fig.A) so that

  larger or more pots and pans can be loaded.

- The silverware basket can be doubled (see Fig. B) so that only

one section may be used when the silverware load is light. This

also makes space for additional pots and pans, and it can also

be placed in the upper rack.

- Silverware should be placed in the silverware basket with the

handles at the bottom; if the rack has side baskets, the spoons

should be located individually into the appropriate slots.

Especially long utensils should be placed in the horizontal posi-

tion at the front of the upper rack.

How to use the upper rack

The upper rack is designed to hold more delicate and lighter

dishware, such as glasses, coffee and tea cups and saucers, as

well as plates, small bowls and shallow pans (as long as they

are not too dirty).

- Position the dishes and cookware so that they do not get moved

by the spray of water.

The upper rack can be adjusted for height by using the knobs lo-

cated on the sides of the rack itself (see Fig.C).

Shelf

Lean tall glasses and those with long stems against the shelf-

not against other items to be washed.

Place glasses, cups and small bowls on the additional cup rack.

The additional cup rack can be swivelled in or out as required

(see fig.D).

Knife rack

The knife rack clips onto the side of the top basket, giving you

the freedom to wash your large sharp knives separately and out

of harm’s way (see fig.E).

fig.B

fig.E

Lower Rack

Upper Rack

Load for 12 Standard Settings

GB

fig.A

fig.D

fig.C

Содержание DW12-LFE SS













Отзывы: