Haier DW12-EFMME, Руководство по обслуживанию

Страница: 11 / 23

Serial Number: Version:00.00 Edition: 2005-7
Dishwasher
Model: DW12-EFM
11/23
Salt
The hardness of the water varies from place to place. If hard water is used in the shwasher,deposits will
form on the dishes utensils.
The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime
and minerals from the water.
Loading the Salt into the Softener
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack and should be filled as follows:
- Remove the lower rack and then unscrew and remove the cap from the salt container;
- If you are filling the container for the first time, fill it with water;
- Place the end of the funnel(supplied) into the hole and introduce about 2 kg of salt.It is normal for a small
amount of water to come out of the salt container.
- Carefully screw the cap back on.
The salt container must be filled when the "low salt" indicator light (located on the control panel) comes
on.
To prevent the formation of rust,load the salt just before beginning a wash cycle.
Adjusting Salt Consumption
The dishwasher is designed to allow for adjusting the amount of salt consumed based on the hardness of
the water used.This is intened to optimize and customize the level of salt consumption so that it remains
at a minimum. Your local Water Board can supply the degree of hardness of the water in your area.