22
HEATED DRY
Select this option to dry dishes with heat.
Not selecting heated dry skips the drying period. If the heated drying period is
not selected the dishes take longer to dry and some spotting can occur. For best
drying, always use a liquid rinse aid. Some items (such as plastics) may need
towel drying.
NOTE:
Heated Dry is an option with Pots and Pans Wash, Normal and Light
cycles. For faster air drying, you can open the door a couple of inches
after the final rinse is complete.
STEAM OPTION
Use for all dish loads, including extra large loads. Steam is generated early
in the cycle to help wet baked on soils from dish load and soften it for easier
removal by the wash system. The steam cycle raises the temperature in the final
rinse to 150ºF (66ºC).
NOTE:
This option can be used with all cycles except Rinse Only and Speed Wash.
DELAY HOURS
Select this option to run your dishwasher at a later time or during off-peak hours.
You can add items to the load anytime during the delay countdown. After adding
items, close the door firmly until it latches.
You can delay the start of a cycle up to 9 hours.
To delay the start:
1. Open the door
2. Repeatedly press "Delay Hours" until you see the desired hours of delay
lighted in LED indicator on the left. When the delay reaches 12 hours, the
delay turns off. Press "Delay Hours" again to select a new number of delay
hours.
3. Select a wash cycle and options
4. Close the door
NOTE:
To cancel the delay and cycle, press Cancel. To cancel the delay and
start the cycle immediately, press "Delay Start" until there is no light in
any of the LED indicators on the left.
1
1
1
1
1
1
