Programme overview
Condition
of dishes
Wash
Programme
Programme
sequence
Normal
Dirty
To be rinsed
Standard
wash
Intense
wash
Rinse
Programme selection
The most appropriate programme can be
identified by comparing the type of crockery,
cutlery,etc.,as well as the amount and con-
dition of food remains,with the details con-
tained in the programme overview.
The corresponding programme sequence,
duration and consumption details are shown
in the bottom half of the overview.
For example:
For a mixture of various types of crockery
and utensils with plenty of pood remains that
are not stuck on fast,use the NORMAL
programme.
Reduce costs!
If only a small number of dishes
have been loaded into the
dishwasher,selecting a programme
that operats at the next lowest
temperature will usually suffice.
Programme data
The stated programme data are based on
standared operating conditions.The values
can vary considerably according to:
- different amounts of dishes
- temperature of mains water supply
- pressure of mains supply
- ambient temperature
- fluctuations in mains voltage
- machine-related factors(e.g. temperature,
water volume,
).
Washing dishes
Switching the dishwasher ON
- Set main switch 1to ON.
Indicators light up according to thelast
programme that was selected.
Indicators light up according to the last
programme that was selected 6 7 8 .
- The programme starts after press button
9 .
End of programme
The programme has ended when all the
indicators of selecting programme turn off.
Switching the dishwasher OFF
Several minutes after the programme has
ended:
- Set the main switch 1 to OFF.
- Turn the water tap off.
(Does not apply when Aqua-Stop unit
has been fitted).
- Remove dishes, etc.when they have
cooled down.
(ca.15min)
(ca.5min)
(ca.10min)
(ca.10min)
(ca.25min)
(ca.10min)
(ca.10min)