White stains are left on crockery,
glasses have a milky appearance
- Not enough detergent was added to input
compartment.
- Amount of rinse-aid was set too low.
- If you used a phosphate-free detergent,
try a detergent containing phosphates
and compare results.
Dishes, cutlery,etc.have not been
dried or disinfected
- Selected programme did not include
drying function function.
- Amount of rinse-aid was set too low.
- Items were removed from dishwasher
too soon.
Glasses have a dull appearance
- Amount of rinse-aid was set too low.
Items were removed from from dishwasher
too soon.
Glasses have a dull appearance
- Amount of rinse-aid was set too low.
Tea stains or traces of lipstick
have not been completely removed.
- Detergent does not have a sufficient
bleaching effect.
- Washing temperature was set too low.
Traces of rust on cutlery
- Cutlery is not sufficiently rustproof.
Glasses become clouded
and discoloured;coating cannot
be wiped off
- Unsuitable detergent was used.
- Glasses are not dishwasher-proof.
Smears left behind on glasses
and culery; glasses have acquired
a metallic appearance
- Amount of rinse-aid set too high.
Other information
Notes on waste disposal
Old appliances still have some residual value.
An envoiment-friendly method of disposal will
ensure that valuable raw materials can be
recovered and used again.
When an appliance has reached the end of
its working life,unplug it from the mains. Cut
through the mains cable and dispose of it
together with the plug.
Destory the door locking mechanism. This
will ensure that children at play cannot be-
come locked inside and are mot exposed to
the risk of suffocation.
Your new appliance was protected by suit-
able packaging while it was on its way to you.
All materials used for this purpose are envi-
ronment-friendly and can be recycled. Please
make a contribution to protecting the envi-
ronment-friendly and can be recycled. Please
make a contribution to protecting the
enviroment by disposing of the packaging.
There is a risk of suffocation by the cardboard
boxes and the plastic wrapping.
Up-to-date information cerning options for
disposal can be obtained from your retailer
or local municipal administration.
Installation
In order to function correctly the dish-
washer must be properly installed. Speci-
fications for the water intake and waste-
water drainage, as well as electrical
connections, must fulfil the criteria that are
set out in the following paragraphs and the
installation instructions.
When installing the dishwasher, carry out
tasks in the following order:
- Check contents of delivery upon receipt,
- Site dishwasher,
- Connect drainage hose,
- Connect inlet hose to water supply,
- Connect dishwasher to electricity supply.
Checking contents of delivery
All functions of your dishwasher have been
thoroughly tested in the factory. A small
number of water marks have been left on
the dishwasher as a result. They disap-
pear as soon as the appliance is used for
the first time.
Siting the dishwasher
Dimensions associated with siting the dish-
washer are contained in the installation
instructions. Ensure that the appliance is
completely level by adjusting the feet.
Make sure that it is standing on a firm
surface.
Drainage connection
See the installation instructions for details
of procedure to be followed.
If necessary, fit a siphon trap (U-bend)with
a connecting piece for the drainage hose.
Connect the drainage hose to the trap
using the enclosed parts.
