No.
inspection items
results
1
If outdoor PCB is electrified; if the communication indicator flashes.
2
3
Check the indoor running parameters are correct after outdoor is connected
the testing board and the testing software, such as the sensor characteristic,
the EEV open angle, etc.
If indoor communication indicator flashes.
<0
< /
< .
mn
he VYR PIH nm vhqdc
bnmsqnkkdq hr khfgs
xdr
xdr
mn
mn
he WXERHF] nm vhqdc bnmsqnkkdq
hr khfgs
xdr
he sgd e`hktqd bncd hr chrok`xdc
nm vhqdc bnmsqnkkdq
hmcnnq lnsnq mns vnqj
qdedq sn sgd sqntakdrgnnshmf
`mc ch`fmnrhr4
.8/ Qnsnq nodq`shnm bnmehql`shnm
rs`qs
rds sgd lncd `r JER2 oqdrr sgd atssnm
he hmcnnq aknvr `hq nts
mn
xdr
he sgdqd hr `amnql`k rntmcr
xdr
mn
mnql`k
bgdbj sgd hmcnnq e`m2
e`m lnsnq `mc hsr bhqbths
bgdbj sgd rtqqntmchmfr
`qntmc e`m lnsnq
Confirm being electrified
Indoor and outdoor are electrified respectively and then check as the following table
(the operation condition data
refer to the appedix)
:
4.State setting of trial operation
Generally, confirm all the indoors one by one. Please set the other indoors at STOP state.
(1)Main power supply and preliminary confirmation
5.Trial operation
64