Haier AP24DF1HRA Скачать руководство пользователя

Страница: 16 / 44

Functions and Control

Domestic air conditioner

7.Funcitions and Control

7.1 Main functions and control specification

7.1.1

Automatic operation

When the running mode is turned to automation after starting the system, the system will first determine the

running mode according to the current room temperature and then will run according to the determined mode.

Tr in the following selection conditions means room temperature, Ts means setting temperature, Tp means

temperature of indoor coil pipe

＞

Ts-3

Choose Cooling Mode

Choose Heating Mode

After turning to the automation mode, the running mode can be switched between cooling mode, fan mode

and heating mode according to the change of the indoor ambient temperature. But the automatic conversion

between cooling mode and heating mode must be conducted after 15 minutes.

7.1.2

Cooling operation mode

Temperature control range:

---30

Temperature difference:

±1

* Control features: When Tr

input airflow

>Ts

set temperature

˅ć

, the compressor will be opened, the indoor

fan will operate at the set speed

．

When Tr

input airflow

set temperature

˅ć

, the compressor will be

Airflow speed control: (temperature difference 1

)

Automatic:

Ts-3

be closed and the outdoor fan will not operate. After the compressor stops to operate, if the Tr

＞

Ts, the

will will be opened and the outdoor fan begin to operate.

The air conditioner unit select the fan speed (High, Medium, Low) automatically according to the

change of the indoor ambient temperature.

Manus: When the system is operating, you can set the high, medium or low speed manually.

Compressor control: When the temperature of the indoor coil is too low, the compressor will be stopped.
When the temperature of the indoor coil is raised, the compressor will be restarted again.

* timing system on/off function.

* sleep function.

* health function.

* fresh function.

The above 4 functions are available under cooling operation mode.

compressor

Содержание AP24DF1HRA













































Результаты поиска

Содержание AP24DF1HRA

Отзывы:

Похожие инструкции для AP24DF1HRA

Бренды по названию

Популярные бренды

Haier AP24DF1HRA, Руководство по обслуживанию

Результаты поиска

Содержание AP24DF1HRA

Отзывы:

Похожие инструкции для AP24DF1HRA

Бренды по названию

Популярные бренды