background image

Installation Precautions

11

Warning

!

Before installing, do read this "Safety precautions"  carefully to guarantee the proper installation.
The below attentive matters are divided  into"    Warning" " and "    Note"  two parts. When  the
wrong installation occur, it is very possible death and severe injury and other serious accidents will
happen. For those items  are  listed  in"    Warning"

      part. But  even the  items listed in "

Note"

part   can also cause serious accidents. Above  all,  both  the  two  parts  are very important contents
related  to safety, so they must be obeyed.
After finishing the installation work, do test run  to  verify everything  is  normal. After  that  please
explain the using and maintenance methods to the user. Additionally, give  this  installation  manual
and operation manual to the user and ask them to keep it properly.

The distributing shop, where you bought the air  conditioner,  or  the  specified  shops  shall  do  the
installation work. If you do the installation work by yourself,  the  improper  installation  will  cause
 water leakage, electric shock fire and other accidents.
The installation work shall be in line  with  what  the  installation  manual  specified.  If  installation
is not proper, water leakage, electric shock, fire and other accidents will occur.
Install the air conditioner to a place where can definitely stand its weight.  Places  not  firm  enough
will cause drop down of unit resulting in body hurt.
The installation work shall be preventive  to  typhoon  and  earthquake.  If  the  installation  work is
not met with the requirements, overturn of the unit will occur resulting in accidents.
The wiring work shall be done by a qualified  person  and  referred  to  the " technical  standard  of
electric   equipment" , "indoor   wiring   regulation" and  what  the  manual   specified.  Do  use
special circuit. If the capacity of the circuit is not enough or bad work, electric shock, fire and other
 accidents will happen.
Using the specified cable to do wiring work and connecting firmly and properly. Fix the connecting
part of the terminals to prevent it from the external force.Improper connection and fixing will cause
 heating and fire etc. accidents.
Wiring shall be kept in correct shape avoiding extrusion. After installation,  the  electric  box  cover
and the external panel shall not nip the wire. Improper installation will cause heating and fire etc.
accidents.
When  setting  or  moving  the  air  conditioner  do  not let  the  air  and  things  alike   get  into  the
refrigeration system except the specified refrigerant. If air and  other  things  enter,  abn-
ormal high pressure will occur, which easily cause break and body injuries etc. Accidents.
When installing, do use the accessories or specified parts. If  not  using  the  parts  specified  by  our
company, water leakage, electric shock, fire and refrigerant leakage will occur.
Do not lead the drainpipe to drain where the sulfur gas may be involved. Otherwise,  the poisonous
gas will enter into the indoor.
During installation, if refrigerant leakage occurs, do the ventilation work immediately.  As  soon  as
the refrigerant gas meets fire, poisonous gas will be produce. If the refrigerant gas enters into room
and meet the air blowing heater, heater or stove etc. fire source, the poisonous gas may be produced.
After installation, confirm there is no leakage of refrigerant.
Do not  install  the  unit  in  a  place  where  the  combustible  gas may  be leaked.  In  any  case  the
combustible gas leaks and accumulated around the unit, fire accident will occur.
Do heat insulation work to the refrigerant gas pipes and liquid pipes to  reach  the  purpose  of  heat
preservation. If the heat insulation measure is not sufficient,  water  generated  by  condensing  dew
will drip leading to wet the floor and indoor articles.

Note

!

Do grounding work.Do not connect the grounding wire to gas pipe,tap,lighting rod or telephone
line.Improper grounding will cause electric shock.
After electric installation,power on them to do electric leakage test.

!

!

!

!

Содержание AD072XLEAA



























Отзывы: