12
Operation
AUTO, COOL, HEAT and DRY
During Auto run operation, the setting temperature which can be adjusted will be shown in LCD display, the unit will select
heating, cooling or fan operation according to the room temperature.
In DRY mode, when the room temperature becomes 2 C lower than the setting temperature, the unit will run intermittently
at LOW speed regardless of FAN setting.
In Heat mode, warm air will blow out after a short period of time due to cold-draft prevention function.
(1)
Unit start
Press button ON/OFF, the unit starts.
The previous status appears on the display (except for
TIMER, SLEEP mode).
(5) Unit stop
Press ON/OFF button, the unit stops running.
(2) Select operation mode
Press Mode button. Each press, operation mode changes
as follows:
Remote controller
AUTO COOL
DRY FAN
HEAT
Then select AUTO, COOL, DRY or HEAT as needed.
Note:
Ultra-low air flow
Temperature
2 C
Temperature
setting
On reaching 2 C lower than
temperature setting, the unit
will run in mild DRY mode.
COOL operation starts
when room temperature is
higher than temperature
setting.
Set the proper temperature.
(3) Temperature setting
Press TEMP button.
Every time the button is pressed, the setting temperature
increases by 1 C; if the button is kept pressed, the setting
temperature will increase quickly.
Every time the button is pressed, the setting temperature
decreases by 1 C; if the button is kept pressed, the setting
temperature will decrease quickly.
(4) Adjust
fan speed
Press FAN button. Each press, fan speed changes as
follows:
Air conditioner will run at the selected fan speed.
When fan speed is AUTO, it is changed automatically
according to the indoor temperature.
Remote controller
AUTO
LOW
MID
HIGH
A
U
T
O
ON
OFF
TEMP
HEALTH
FAN
MODE
SLEEP
SWING
CLOCK
TIMER
SET
LOCK
LIGHT
RESET
1
2
3
HEAT
POWER/SOFT
5
3
4
HEALTH AIRFLOW
FRESH
10
o
C
