Haier AC-8888-107 Скачать руководство пользователя | Manualshive

Страница: 16 / 45

background image

Commercial Air Conditioner

Model: heat pump, 10SEER UNITS

15

injury or death.

This product is designed and manufactured to permit installation in accordance with National Codes.

It is the installer's responsibility to install the product in accordance with National Codes
and/or prevailing local codes and regulations

. The manufacturer assumes no responsibility for

equipment installed in violation of any codes or regulations.

The United States Environmental Protection Agency (EPA) has issued various regulations
regarding the introduction and disposal of refrigerants in this unit.

Failure to follow these

regulations may harm the environment and can lead to the imposition of substantial fines. Because
these regulations may vary due to the passage of new laws we suggest that any work on this unit be
done by a certified technician. Should you have any questions please contact the local EPA office.
The manufacturer's warranty does not cover any damage or defect to the air conditioner caused by
the attachment or use of any components, accessories or devices (other than those authorized by
the manufacturer) into, onto, or in conjunction with the air conditioner.

You should be aware that

the use of unauthorized components, accessories or devices may adversely affect the
operation of the air conditioner and may also endanger life and property

. The manufacturer

disclaims any responsibility for such loss or injury resulting from the use of such unauthorized
components, accessories or devices.

Attach the service panel to the outdoor unit securely

. If the service panel is not attached

securely, it could result in a fire or an electric shock due to dust, water, etc.
These instructions are intended as an aid to qualified, licensed service personnel for proper
installation, adjustment and operation of this unit. Read these instructions thoroughly before
attempting installation or operation.

Failure to follow these instructions may result in improper

installation, adjustment, service or maintenance possibly resulting in fire, electrical shock,
property damage, personal injury or death.

This product is designed and manufactured to permit installation in accordance with National Codes.

It is the installer's responsibility to install the product in accordance with National Codes
and/or prevailing local codes and regulations

. The manufacturer assumes no responsibility for

equipment installed in violation of any codes or regulations.

The United States Environmental Protection Agency (EPA) has issued various regulations
regarding the introduction and disposal of refrigerants in this unit.

Failure to follow these

regulations may harm the environment and can lead to the imposition of substantial fines. Because
these regulations may vary due to the passage of new laws we suggest that any work on this unit be
done by a certified technician. Should you have any questions please contact the local EPA office.
The manufacturer's warranty does not cover any damage or defect to the air conditioner caused by
the attachment or use of any components, accessories or devices (other than those authorized by
the manufacturer) into, onto, or in conjunction with the air conditioner.

You should be aware that

the use of unauthorized components, accessories or devices may adversely affect the
operation of the air conditioner and may also endanger life and property

. The manufacturer

disclaims any responsibility for such loss or injury resulting from the use of such unauthorized
components, accessories or devices.

Attach the service panel to the outdoor unit securely

. If the service panel is not attached

securely, it could result in a fire or an electric shock due to dust, water, etc.

8.1 OUTDOOR UNIT INSPECTION

This product has been inspected at the factory and released to the transportation agency
without known damage. Inspect exterior of carton for evidence of rough handling in
shipment. Unpack carefully. If damage is found, report immediately to the transportation
agency.

8.2 EQUIPMENT PROTECTION FROM ENVIRONMENT

«
...
14
15
16
17
18
...
»

Содержание AC-8888-107














































Отзывы:

Нет отзывов

Похожие инструкции для AC-8888-107

Бренд: Ideal Air Страницы: 28

Бренд: Olimpia splendid Страницы: 24

Бренд: Kaisai Страницы: 168

Бренд: Unitary products group Страницы: 68

Бренд: RollSeal Страницы: 44

AIRPUR PAP 650V

Бренд: S&P Страницы: 13

Бренд: Daikin Страницы: 15

Бренд: Sinclair Страницы: 31

DO-CH-ACL150DRT

Бренд: Dutch originals Страницы: 48

Бренд: DayRelax Страницы: 100

Бренд: Olmo Страницы: 19

Бренд: Air-Care Страницы: 6

ADAPT Parasol b 1200

Бренд: Swegon Страницы: 37

Бренд: Dimplex Страницы: 16

Super Multi NX FTXG25JV1BW

Бренд: Daikin Страницы: 242

Бренд: Daitsu Страницы: 120

Бренд: Daewoo Страницы: 19

Бренд: Morgan Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды