HAI OmniTouch 5.7, Руководство пользователя

Страница: 4 / 20

2
HOME PAGE
Simply touch one of the icons to select the desired function.
Control:
Control units (lights, appliances, outputs, and flags), scenes, and all on/off
Security: Arm/disarm security, emergency alarms, bypass/restore zones, and go to area*
Modes: Set a mode (home, away, night, vacation, party, and special) and go to area*
Button: Activate Button (macro) programs
Temperature: Control thermostats, temperature sensors, and humidity sensors
Status: View status of lights, zones, and temperatures / view and edit programs
System: View event log, command voice/text messages, configure the touchscreen and
controller, clean the screen, and create controller programs
Setup: Configure touchscreen and controller, clean screen, and create programs**
Video: View a camera, select from 6 different cameras, set the contrast and brightness
for the current camera, select full screen video, and run a macro**
Audio: View and control a multi zone audio distribution system
* Some HAI automation systems have lighting “Modes”, rather than “Security”
** If video is not connected to the system, “Setup” is displayed; otherwise “Video” is displayed
TOUCHSCREEN LED
If security is part of your HAI system, the touchscreen LED is used to indicate whether the
security system is currently armed or disarmed. If armed in any security mode, the LED is set
to red. If the system is disarmed, the LED is set to green. The LED flashes when a Message is
displayed.
If lighting modes are part of your HAI system, the touchscreen LED is always green. The LED
flashes when a Message is displayed.