HAI Omnistat2 RC-1000, Руководство по протоколу

Страница: 10 / 18

Status:
57 Outside
humidity
58 Current day of the week (0=Sunday)
59 Cool Setpoint (51-91 in Omnitemp)
60 Heat Setpoint (51-91 in Omnitemp)
61 Current mode (0=Off, 1=Heat, 2=Cool, 3=Auto, 4=EM Heat)
62 Fan mode (0=Auto, 1=On, 2=Cycle)
63 Hold mode (0=Off, 1=On, 2=Vacation)
64 Current temperature (in Omnitemp)
65 Current time – seconds (0-59)
66 Current time – minutes (0-59)
67 Current time – hours (0-23)
68 Current outside temperature (in Omnitemp)
70 Energy price level set by controller (0=low, 1=Mid, 2=High, 4=Critical)
71 Current mode (0=Off, 1=Heat, 2=Cool)
72 Current status of Relays
73 Model number
74 Current energy cost (0 – 254, 255=disabled)
Programming Tuesday - Friday:
75
Programming Tuesday morning time (15 minute increments)
76 Programming Tuesday morning cool setpoint (in Omnitemp)
77 Programming Tuesday morning heat setpoint (in Omnitemp)
78 Programming Tuesday day time (15 minute increments)
79 Programming Tuesday day cool setpoint (in Omnitemp)
80 Programming Tuesday day heat setpoint (in Omnitemp)
81 Programming Tuesday evening time (15 minute increments)
82 Programming Tuesday evening cool setpoint (in Omnitemp)
83 Programming Tuesday evening heat setpoint (in Omnitemp)
84 Programming Tuesday night time (15 minute increments)
85 Programming Tuesday night cool setpoint (in Omnitemp)
86 Programming Tuesday night heat setpoint (in Omnitemp)
87 Programming Wednesday morning time (15 minute increments)
88 Programming Wednesday morning cool setpoint (in Omnitemp)
89 Programming Wednesday morning heat setpoint (in Omnitemp)
90 Programming Wednesday day time (15 minute increments)
91 Programming Wednesday day cool setpoint (in Omnitemp)
92 Programming Wednesday day heat setpoint (in Omnitemp)
93 Programming Wednesday evening time (15 minute increments)
94 Programming Wednesday evening cool setpoint (in Omnitemp)
95 Programming Wednesday evening heat setpoint (in Omnitemp)
96 Programming Wednesday night time (15 minute increments)
97 Programming Wednesday night cool setpoint (in Omnitemp)
98 Programming Wednesday night heat setpoint (in Omnitemp)
99 Programming Thursday morning time (15 minute increments)
100 Programming Thursday morning cool setpoint (in Omnitemp)
101 Programming Thursday morning heat setpoint (in Omnitemp)
102 Programming Thursday day time (15 minute increments)
103 Programming Thursday day cool setpoint (in Omnitemp)
104 Programming Thursday day heat setpoint (in Omnitemp)
105 Programming Thursday evening time (15 minute increments)
106 Programming Thursday evening cool setpoint (in Omnitemp)
Copyright © 2008 Home Automation, Inc.
All Rights Reserved
Page 8