12
OMNIPRO II AND LUMINA PRO SETUP
A.
OmniPro II and Lumina Pro can have two 45A00-1 Wireless Receivers connected.
When connected, the 45A00-1 is recognized as an Expansion Enclosure. Each
45A00-1 can handle up to 64 wireless zones, in groups of 16. Each group of 16
zones is considered 1 Expansion Enclosure (8 Expansion Enclosures maximum).
B.
At a console, select “Installer Setup” (press 9, installer code, then #). Press 2 for
“Zones”. Press the down arrow once, then enter the number of expansion
enclosures (groups of 16 wireless zones) being used.
C.
The wireless zones on the OmniPro II and Lumina Pro start on Zone 49 (if no
hardwire expansion enclosures are used).
D.
The 45A00-1 address is set at 1 (A1) (if no hardwire expansion enclosures are
used).
E.
If the OmniPro II / Lumina Pro has 1 hardwire expansion enclosure, the wireless
zones start on Zone 65. The 45A00-1 address is then set to 2 (A2).
F.
If the OmniPro II / Lumina Pro has 2 hardwire expansion enclosures, the wireless
zones start on Zone 81. The 45A00-1 address is then set to 3 (A3).
G.
If the OmniPro II / Lumina Pro has 3 hardwire expansion enclosures, the wireless
zones start on Zone 97. The 45A00-1 address in then set to 4 (A4).
H.
If the OmniPro II / Lumina Pro has 4 hardwire expansion enclosure, the wireless
zones start on Zone 113. The 45A00-1 address is then set to 5 (A5).
I.
If the OmniPro II/ Lumina Pro has 5 hardwire expansion enclosures, the wireless
zones start on Zone 129. The 45A00-1 address is then set to 6 (A6).
J.
If the OmniPro II / Lumina Pro has 6 hardwire expansion enclosures, the wireless
zones start on Zone 145. The 45A00-1 address in then set to 7 (A7).
K.
If the OmniPro II / Lumina Pro has 7 hardwire expansion enclosures, the wireless
zones start on Zone 161. The 45A00-1 address in then set to 8 (A8).