Page 5
Notes on Module Types:
1.
Omni controllers with Version 1.5 or later firmware support one serial interface configured as Omni-Link.
2.
OmniPro and Aegis controllers with Version 1.5 or later can support two serial interfaces:
a.
With Version 1.5 through 1.7 firmware the first serial interface (the one with the lower ADDR setting) can be configured for
Omni-Link or Pro Link. The second serial interface can be configured for Pro-Link only.
b.
With Version 1.8 or later firmware both modules can be set to Omni-Link or to Pro-Link. You can also use a combination of
Omni-Link and Pro-Link.
SERIAL 1 RATE
Select the baud rate for the first serial interface from the list below. Use the arrow keys to select the baud rate then press #.
BAUD RATE
NUMBER
75 baud
1
150 baud
2
300 baud
3
600 baud
4
1200 baud
5
2400 baud
6
4800 baud
7
9600 baud
8
(default)
SERIAL 2 RATE
(OmniPro and Aegis V 1.6 or later)
If a second serial interface is installed, select its baud rate as shown above.
SPECIFICATIONS
Dimensions:
5.65W x 5.5H
Current Consumption:
40mA maximum
