Hahnel Viper TTL, Инструкция по эксплуатации

Страница: 5 / 40

GB
Viper TTL - English
5
Group Power Control setting for
Manual and TTL FEC
From the Viper TTL transmitter you can adjust the power
level of each group which is in <M> mode
1. Press <SEL>
02
select button and all three icons
A
,
B
and
C
will flash
2. Press one button
A
or
B
or
C
to select which group
you want to adjust the power. Now only the selected
group icon
A
or
B
or
C
will flash
3. Turn the red <Adjust Dial>
03
up or down to adjust
the power level
4. The output power can be adjusted from 1/128 to 1/1 by
turning the red <Adjust Dial>
03
up or down
5. Press <SEL>
02
again to save the new power level
From the Viper TTL transmitter you can adjust the FEC
level of each group which is in <TTL> mode
1. Press <SEL>
02
select button and all three icons
A
,
B
and
C
will flash
2. Press one button
A
or
B
or
C
to select which
group you want to adjust the FEC level. Now only the
selected group icon
A
or
B
or
C
will flash
3. Turn the red <Adjust Dial>
03
up or down to adjust
the FEC level
4. The icon < > will be shown when the flash exposure
compensation amount is changed. Turing the red
<Adjust Dial>
03
up will increase the FEC to max +3.
Turing the dial
03
down will reduce the FEC to min -3
5. Press <SEL>
02
again to save the new power level
• The power level of a studio light cannot be controlled
wireless by the Viper TTL. Adjust the level manually from
the studio light controls
• The setting of each group in the Viper TTL will remain even
if the Viper TTL is turned off or needs batteries exchanged
• Manual output power setting
< -- >
. In this power output
level the Viper TTL will not control the power level this can
be adjusted on the Speedlight. It is recommended to use
this setting for non compatible Speedlights which do not
allow power control via the Viper TTL wireless system
Simultaneous Group power
adjustment - FEC adjustment
From the Viper TTL transmitter you can easily adjust the
output power level and FEC setting for all groups
1. Press <SEL>
02
button for more than 3 seconds and
all power levels/FEC settings of groups A,B,C will flash
2. Turn <Adjust Dial>
03
to adjust simultaneously all
power levels/FEC settings up or down to the new
desired value
3. Then press <SEL> button
02
to save the setting