GB
20
2. If you are not using a Viper Mini as
a master unit, then use a Modus
360RT as the Master unit
• Press and hold the
<MODE>
while
you switch on the unit
< icon
button >.
• A red LCD will light up and will
show
<
>
3. To DCM a Modus360RT as a slave
• Press and hold the
< ZOOM >
button while you switch on the unit
pressing
< icon >
button.
• A red LCD will light up and will
show
<
>
•
If the
<
>
Icon flashes then
it means that it cannot detect a
master unit to match to.
4. Additional Modus360RT can be
matched as slave units to this
master in the same way. Do not
switch off the master unit until all
slave units have been matched.
• To DCM a Modus360RT as a slave
• The “Master” unit must be on all the time and show <Co di ng>/
<MASTER> whilst all the “Salves” are DCM matched
Once all slave units are DCM matched, reboot the master and all slaves
by turning OFF/ON
• Once all devices are DCM matched they will memorise their unique
ID even if power is removed. Therefore you only need to DCM your
set once
• You can DCM match all hahnel wireless devices which share the same
DCM matching system (i.e. Modus 600RT, Modus 360RT, Viper TTL
Transmitter and Receiver, Viper Mini Transmitter, Captur Transmitter
and Receiver, Captur Module Pro, Captur Module Timer.
• If you add more Speedlights or hahnel wireless devices to your set,
then you need to carry out DCM matching again for all of your units.
