Hahn & Sohn HDE14000SA-SA3, Инструкция по эксплуатации и гарантийный талон

Страница: 10 / 28

9
2.1. Construction of the generator - control panel
Icon Button Functionals
Stop / Reset /
Back

Stopping the chiller operation in auto and manual modes. A single press will
start the stopping process, the unit will turn itself off after cooling down.
Pressing the button a second time will turn off the unit immediately.

In stop mode, hold the button for more than 3 seconds to

to test the panel indicators (lamp test).

Reset of all chiller alarms.

Back to the main window.
Start

Starting the aggregate in manual mode. A single press will start the start-up
process, the genset will turn on after a while. Pressing the button a second
time will start the generator immediately.
Manual mode

Setting the chiller control module in manual mode
Auto mode

Setting the chiller control module in automatic mode
Supply
Open / Close

Mains or chiller control - open and closed transfer
Settings / Confirm

Entering the settings menu

A single press confirms the settings in the main menu
Up in menu /
Increase
of value

Scroll through the screens in the menu

Moving the cursor up in a menu

Increasing parameter values in the settings menu
Down in menu /
Decrease of
value

Scroll through the screens in the menu

Moving the cursor down in a menu

Decreasing parameter values in the settings menu
Alarm / Error
idicator
Genset status
indicator