background image

 

Models 7180 and 7380 

Owner’s Manual and Installation Guide

 

5/22/2019 

10 Year Limited Warranty 

To Whom Warranty Is Extended 

This warranty is issued to the original owner at the original location 

site and is not transferable to other sites or to subsequent owners 
of the system.  

For international sales, the supplying dealer is the administrator of 
the warranty and should be the first point of contact in the case of 
a claim. 

Coverage 

This limited warranty covers the Hague Quality Water International 
system delivered to the original owner at the original location when 
the system is purchased for personal, family, or household use. It 

is intended to cover defects occurring in workmanship or materials 
or both.  

Warrantor’s Performance and Length of Limited Warranty 

 

A.O. Smith Water Treatment (North America), Inc. warrants that 
upon receipt from the original owner of any mechanical or 
electronic part which is found to be defective in materials or 

workmanship, A.O. Smith Water Treatment (North America), Inc. 
will repair or replace the defective item for 3 years from date of 
original installation. Media is not warranted. 

A.O. Smith Water Treatment (North America), Inc. further warrants 
that upon receipt from the original owner of any Hague Quality 

Water International media tank/valve body, brine cabinet, found to 
be defective in material or workmanship, A.O. Smith Water 
Treatment (North America), Inc. will repair or replace the defective 
item for 10 years from date of original installation. 

All defective parts must be returned, along with the equipment 
serial number and date of original installation, to A.O. Smith Water 

Treatment (North America), Inc. PREPAID, and replacement parts 
will be returned by A.O. Smith Water Treatment (North America), 
Inc. to the original owner FREIGHT COLLECT. 

Further Exclusions and Limitations on Warranty  

THERE ARE NO WARRANTIES OTHER THAN THOSE 
DESCRIBED IN THIS WARRANTY INSTRUMENT. 

This warranty does not cover any service call or labor costs 
incurred with respect to the removal and replacement of any 

defective part or parts. A.O. Smith Water Treatment (North 
America), Inc. will not be liable for, nor will it pay service call or 
labor charges incurred or expended with respect to this warranty. 

In the event the water supply being processed through this product 
contains sand, bacterial iron, algae, sulfur, tannins, organic matter, 
or other unusual substances, then, unless the system is 

represented as being capable of handling these substances in the 
system specifications, other special treatment of the water supply 

must be used to remove these substances before they enter this 
product. Otherwise, A.O. Smith Water Treatment (North America), 
Inc. shall have no obligations under this warranty. 

This warranty does not cover damage to a part or parts of the 
system from causes such as fire, accidents, freezing, or 
unreasonable use, abuse, or neglect by the owner. 

This warranty does not cover damage to a part or parts of the 
system resulting from improper installation. All plumbing and 

electrical connections should be made in accordance with all local 
codes and the installation instructions provided with the system. 

The warranty does not cover damage resulting from use with 
inadequate or defective plumbing; inadequate or defective water 
supply or pressure; inadequate or defective house wiring; improper 

voltage, electrical service, or electrical connections; or violation of 
applicable building, plumbing, or electrical codes laws, ordinances, 
or regulations. 

THIS WARRANTY DOES NOT COVER INCIDENTAL, 
CONSEQUENTIAL, OR SECONDARY DAMAGES.  

ANY IMPLIED WARRANTIES ON THE PRODUCT DESCRIBED 
IN THIS WARRANTY WILL NOT BE EFFECTIVE AFTER THE 
EXPIRATION OF THIS WARRANTY.  

No dealer, agent, representative, or other person is authorized to 
extend or expand this limited warranty. 

Some locations do not allow limitations on how long an implied 
warranty lasts or the exclusion or limitation of incidental or 

consequential damages, so the above limitations and exclusion 
may not apply to you. This warranty gives you specific legal rights 
and you may also have other rights which vary from location to 
location. 

Claims Procedures 

Any defects covered by this warranty should be promptly 
reported to: 

A.O. Smith Water Treatment (North America), Inc.

 

4343 S. Hamilton Rd.  

Groveport, OH 43125 USA 
1-614-836-2115 

When writing about the defects, please provide the original 

owner

s name, telephone number, and original address, serial 

number and model number of the product, and date of purchase. 

(This information should be listed in General Information at the 
front of this manual.) A.O. Smith Water Treatment (North America), 
Inc. reserves the right to replace defective parts with exact 
duplicates or their equivalent.  

For international sales, the supplying dealer is the administrator of 
the warranty and should be the first point of contact in the case of 
a claim. 

 

 

 

 

Содержание MAXIMIZER 7180





























Отзывы: