Hague HFAIR-1054, Руководство пользователя и инструкция по установке

Страница: 8 / 28

8
Hague Filter Owner's Manual
1
DAYS BETWEEN REGEN
SET
3
2
REGEN TIME HOUR
AM
SET
12:00
3
REGEN TIME MINUTES
AM
SET
12:00
4
LIGHT NORMALLY
SET
ON
5
Return to general display.
REGEN
UP
DOWN
NEXT
CLOCK
REGEN
UP
DOWN
NEXT
CLOCK
REGEN
UP
DOWN
NEXT
CLOCK
REGEN
UP
DOWN
NEXT
CLOCK
REGEN
UP
DOWN
NEXT
CLOCK
TIME OF DAY MON
GPM
2:40 8
PM
Typically, time of day should only need to be set after extended power outages or when daylight saving time begins or ends . If an extended
power outage occurs, the time of day will flash on and off indicating that the time should be reset . To set the clock:
STEP 1 –
Press the
CLOCK
button .
STEP 2 – Set the hour of the day using UP or DOWN buttons . AM/PM toggles after 12 . Press NEXT to go to step 3 .
STEP 3 –
Set the minutes using
UP
or
DOWN
buttons . Press
NEXT
to go to step 4 or
REGEN
to return to previous step .
STEP 4 – Set the day of the week using UP or DOWN buttons . Press NEXT to exit clock setting or REGEN to return to previous step .
1. Set Time of Day
1
TIME HOUR
AM
SET
2:00
TIME MINUTES
AM
SET
2:00
2 3
CURRENT DAY
SET
MON
4
return to general display
REGEN
UP
DOWN
NEXT
CLOCK
REGEN
UP
DOWN
NEXT
CLOCK
REGEN
UP
DOWN
NEXT
CLOCK
REGEN
UP
DOWN
NEXT
CLOCK
TIME OF DAY MON
GPM
2:40 8
PM
Press NEXT to cycle to the next step or REGEN to return to the previous step .
STEP 1 – Press and hold the NEXT and UP buttons simultaneously for 3 seconds .
STEP 2
–
DAYS BETWEEN REGENERATION (DAY OVERRIDE):
Use the
UP
or
DOWN
buttons to adjust the day
override . Adjustable from 1-28 days or OFF . The manufacturer has factory set 3 days as the default .
The Day Override value represents the maximum number of days between regenerations . If any number
is set (1-28 days), a regeneration will be scheduled for that day if the gallon capacity has not been met . If
OFF is set, the unit will only initiate a regeneration once the gallon capacity has been met .
STEP 3 – REGENERATION HOUR: Use the UP or DOWN buttons to adjust the time of day the unit will
regenerate . AM/PM toggles after 12 . The manufacturer has factory set 12:00 A .M . as the default setting
which is recommended for a normal household .
STEP 4 – REGENERATION MINUTES:
Use the
UP
or
DOWN
buttons to set minutes .
STEP 5 – BACKLIGHT DISPLAY CONTROL: Use the UP or DOWN buttons to turn the backlight setting ON or OFF .
If unit is set to OFF, the backlight will turn off after 5 minutes of inactivity . This setting is not available on
all models.
Press NEXT to return to General Display .
2. Programming
Programming Procedures