Hague Quality Water WaterMax 1AAN, Руководство пользователя и инструкция по установке

Страница: 17 / 48

WaterMax ST Series Owner’s Manual 5/11/2018 17
Service Settings, Cont.
Service Settings—History
History is an optional set of menus that acts as a clipboard for storing the history of water chemistry, total
regenerations, amount of water to pass through the unit, unit model number, and other settings. The history can
be used for diagnosis purposes or just for reference. History settings DO NOT affect operation.
When you select “Yes” in the history screen, the following screens will be available. Take notice of the “H-”
prefix to signify that you are viewing the history.
Service Settings—History (if set to Yes)
Title Description Factory Setting
H-Software V. # Software version number (For Reference Only) V1.1
H-Date Enter Installation Date Format MMDDYY 0
H-Number of People Enter number of people in the household (1 to 50) 4
H-Hardness grains Enter hardness test results (0 to 199 ppm (mg/L)) 1
H-Iron ppm Enter iron test results (0 to 99 ppm (mg/L)) 0
H-Manganese ppm Enter manganese test results (0 to 99 ppm (mg/L)) 0
H-Chlorine ppm Enter chlorine test results (0 to 99 ppm (mg/L)) 1
H-Sulfur ppm Enter sulfur test results (0 to 99 ppm (mg/L)) 1
H-pH ppm Enter pH test results (0 to 99.9) 00.0
H-Iron Bacteria Is iron bacteria present (Yes or No) No
H-Total Regenerations Number of regenerations completed. Value does not reset
(For Reference Only)
0
H-Total Gallons Number of gallons that have passed through the unit. Value does not
reset (For Reference Only)
0
H-Model Number Enter model number 3MAQ
H-Save History Choose to save history (Yes or No) Yes