The KE-USB36FS uses standard system drivers for its functions.
When using the unit for the first time on your computer, USB
drivers will be loaded for the device.
Connection to the Computer
The KE-USB36FS attaches to the computer’s
USB port. Use a standard A-B Male/Male
type USB connecting cable from the KE-
USB36FS to the USB port on the computer.
The KE-USB36FS may be connected
directly to the USB port on the computer or
through a compliant USB Hub.
Connect the type “B” end of the USB cable
into the KE-USB36FS and the type “A” end
into the computer or hub USB connector.
The KE-USB36FS may be
connected to the computer
with power on or off. If
“hot plugged,” the unit
will generally take several
seconds to become fully
active on your system.
Note:
The first time you
use the KE-USB36FS with
a particular computer, the
system will load the appropriate drivers for the device. Follow
the default selections to load the standard drivers for the KE-
USB36FS.
The KE-USB36FS is powered directly from the USB port, so no
external power is required.
The KE-USB36FS is compatible with all operating systems which
offer full support for standard USB keyboard and mouse devices.
Figure 2
- Connection of
the USB cable to computer
Figure 3
- Connection of the USB cable to the USB
port of the KE-USB36FS.
5
20
KE-TBH3
Trackball interface cable.
This cable attaches the KE-
USB36FS Trackball input to
the Trackball itself.
Accessories
We offer several accessories to connect to your KE-USB36FS.
KE-USBMM6
6 ft. Male/Male Type
A to Type B USB
Cable
IOX36
Input Header to screw terminal
breakout board. This product connects
to the KE-
USB36FS
input
header
through a standard IDE cable
(included). Each input is brought
out to a separate, labeled, screw
terminal. Use for solderless
connection to the KE-USB36FS.
