Introduction to the USBtoUSB
3
Translation Modes of the USBtoUSB
3
ASCII Mode
3
Extended ASCII Mode
4
Key Number Mode
6
Additional Key Number Mode Commands
8
Key Number Mode Examples
9
Producing Mouse Action on the Target Computer 10
Mouse Packet Examples
12
Sending Serial Control Commands
13
USBtoUSB Configuration Program
14
USBtoUSB Connections & Specifications
17
17
2
CONTENTS
Operating Voltage
5 Volts DC +/- 5%
(Powered from USB ports)
Operating Current
Less than 100 ma each port
Operating Temp.
0 to 70 Degrees C
Computer Interface
USB - Target Computer
USB - Com Port Source
Cable Length
Maximum 15ft each port
USB Com Port Protocol
19200, 8 , N, 1
USBtoUSB Specifications
USBtoUSB Connections
Using the included USB cables, attach the Com Port USB connector
to the computer that will be sending commands to the USBtoUSB.
Attach the KBD/MOUSE connector to the target computer where
the keyboard and mouse actions will be generated based on the
commands.
USB Com Port
device,
attach
to the computer
sending the serial
commands.
USB KBD/MOUSE Port, attach
to the computer where the
keyboard and mouse actions
are to take place.
Questions or Comments?
Please send us an email!
www.hagstromelectronics.com
email:
USB Data from USB Com
Port on one Computer
Generates Keyboard and Mouse
actions on another Computer
This port is also to be
plugged into the computer
running the USBtoUSB.exe
configuration program.
