Hagie STS 10, Руководство оператора

Страница: 68 / 127

4.6E
OPERATING SYSTEMS CONTINUED
IV.
OPERATING SYSTEMS
E. OPERATING THE QUICK-ATTACH SYSTEM
FOLLOW THESE STEPS:
1. Square up to the boom. Make sure the quick attach lock assem-
blies are open.
2. Pull into the boom slowly .
3. Once you are pulled in squarely to the boom, check to see that the
quick attach hooks are high enough to go over the lock pins. If the
hooks are high enough, no adjustments need to be made to the
machine. Continue to pull into the boom until the hook openings
are above the lock pins.
4. Turn the engine OFF before connecting any hoses or electrical
lines.
5. Re-attach all solution lines, electrical lines, hydraulic lines, and
foamer lines (if equipped). If you are attaching to something other
than the boom, be sure you read the operators’ manual for the at-
tachment to know what lines will need to be hooked up and where
the connection is.
6. Start the machine. Lift the boom until the hooks have engaged
fully.
7. Lock the quick attach lock assemblies. Be sure that the assembly
is fully engaged!
8. Put the boom stands in the “travel position”.
9. Continue with your spray job.
RECONNECTING TO THE MACHINE
PAGE AND FIGURE REFERENCE
4.7E
4.7E
4.7E; FIGURE 4.7E-1
4.7E; FIGURES 4.4E-2
4.8E; FIGURE 4.8E-1
4.8E; FIGURE 4.8E-1
4.8E; FIGURE 4.8E-2
4.8E; FIGURE 4.8E-3