Hagie DTS 10, Руководство пользователя

Страница: 97 / 122

SECTION 8 –
MAINTENANCE AND STORAGE
8-13
NOTE: During late season crop
applications, the grease may possibly
be wiped away due to the passing of
crop leaves. More frequent grease
application may be required to
ensure proper lubrication and
optimal performance.
Transom, Lift Arm, and Lift
Cylinders
Lubricate the Transom, Lift Arm, and Lift
Cylinder grease zerks every 25 hours of
operation.
•
(8) Lift Arm Pivot Locations (Item 1)
• (4) Lift Cylinder Pivot Locations
(Item 2)
• (4) Boom Fold Pivot Locations -
Transom (Item 3)
Boom Hinge and Breakaway
Pivots
Lubricate the two grease zerks on each
breakaway (between the transom and each
inner boom section) every 25 hours of
operation.
60/80/90’ Spray Booms
60-ft. spray booms have a grease zerk on
the boom level pivot point connected to the
breakaway (Item 1), on the boom extension
vertical folding pivot point (Item 2), and on
the boom folding link clevis pins (Item 3).
Lubricate every 25 hours of operation.
80/90’ Spray Booms Only
In addition, 80 and 90-ft. spray booms also
have a grease zerk on the outer boom
breakaway folding pivot (Item 3). Lubricate
every 25 hours of operation.
• Coat with
grease
approximately
30” (76 cm)
-Typical View
-Typical View
-Typical View
-Typical View