manualshive.com logo in svg

Hägglunds CMp, Инструкция по установке и обслуживанию

Поделиться
Скачать
Hägglunds CMp Скачать руководство пользователя страница 36

36/64 

 CMp

 | Installation

Bosch Rexroth AB,  RE 15409 Version 08.2022,

 

7  Installation

7.1  Unpacking

 CAUTION

Danger from falling parts during unpacking!

Risk of injury and damage on components!

 

f

Place the packaging on a flat and solid surface.

 

f

Only open the packaging from the top.

 

f

Remove the packaging from the S-Link Monitoring Unit.

 

f

Check the S-Link Monitoring Unit for transport damage and completeness.

 

f

Dispose of the packaging according to the environmental regulations of 

 

your country.

7.2  Mounting the S-Link Monitoring Unit

Depending on each order, different mounting alternatives may have been chosen. 
Please consider your placement of the S- Link box before mounting, to allow good 
cabling between the control unit and the S-Link Monitoring Unit.

7.2.1 

Mounting on wall, type 00

No mounting material is delivered together with the S-Link Monitoring Unit

1. 

Drill holes according 

to measurements. See 
dimensions on 

Fig. 

13: Drill dimensions 
type 00, 01 page 24

 

Attach with suitable 
screws.(Not supplied)

DD00078684

Содержание CMp

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды