Piccolo MC Headamp Kit Manual
8
4 Installation and Use
Testing
First do a visual check to insure all components have been installed and in the proper
orientation. With batteries installed, turning the gain knob away from the off position
will turn the amplifier on. LED should light up.
Installation
Connect the Piccolo between your turntable and MM phonostage. Connect the turntable
ground wire to the knurled ground lug. Set the gain to accommodate your cartridge’s
output level. Adjust resistive loading to taste.
Cartridge
Gain
<0.2mV 26dB
0.2mV – 0.6mV
20dB
0.6mV – 2mV
12dB
Hum
The Piccolo is very quiet on it’s own. However, in rare cases an installation environment
might be noisy with stray fields. If you are experiencing hum, check for broken grounds,
unshielded interconnects, nearby power transformers, etc.
Pops and Thumps
Sorry about this, but turn the volume down on your audio system when changing gain.
Turning the gain switch can add a loud noise as it changes contacts. This also happens
with loading, but not as noticeable.
Содержание Piccolo
Страница 1: ...HAGERMAN T E C H N O L O G Y Piccolo Moving Coil Headamp Kit Manual...
Страница 11: ......
Страница 12: ......