Piccolo MC Headamp Kit Manual
5
3 Assembly
Circuit Board
Assemble in the specified order, soldering and clipping leads before continuing. The
surface mount JFETS have been pre-installed for your convenience. Beware of
component polarity! Not all diodes or electrolytics are lined up the same way. The
square hole is the positive lead.
Install all resistors. Use the guide in the back of this manual. For dc offset reduction,
change R10 to 232 ohms. Use a 10 ohm resistor for L1.
Install diodes.
Install ICL7660S (add jumper from pins 1 to 8).
Install terminal shields (wings facing outwards).
Install LED.
Install LM2941 regulator
Install RCA jacks.
Install electrolytics.
Install remaining capacitors.
Содержание Piccolo
Страница 1: ...HAGERMAN T E C H N O L O G Y Piccolo Moving Coil Headamp Kit Manual...
Страница 11: ......
Страница 12: ......