Hagerman Audio BUGLE2, Руководство пользователя

Страница: 5 / 12

BUGLE2 Phonostage Kit PCB 5
Assembly
Using the stuffing guide, install all of the resistors. Solder in place and cut leads. The
guide shows values for 40dB. Gain and loading options are listed in the following
chart.
Resistor 40dB 50dB 60dB
R23 681 100
R1 316 316 100
R3, R8 1k30 681 392
Install resistors
Add diode. Solder, and cut.
Install diode
Insert sockets for the operation amplifiers. Make sure of orientation! Solder in place.
Install sockets
Add 100nF decoupling capacitors. Solder and cut.
Install 100nF caps
Add DC jack, TLE2426 rail-splitter (TO-92 package), and LED. The long lead of LED
goes into square hole. Solder in place and cut leads.
Install DC jack, rail-splitter, LED
Install film capacitors, 220nF first, then 10nF. Solder in place and cut leads.
Install film caps
Add inductors. Solder in place and cut.
Install inductors
Insert RCA jacks. Use red for right channel, white for left. Make sure they are
pressed all the way down to circuit board. Solder.
Install RCA jacks
Install 220uF electrolytic capacitors. Long lead goes into square hole.
Install electrolytic capacitors